Coolerguys Triple 120mm Fan Cooling Kit
Acrylic 840556002086
Metal 840556002093
This is an always on kit: recommended if you are using a switched outlet, want to run the fan continuously, or just save some money.
We also offer our kits with a Coolerguys programmable thermal controller with LED temperature display as well as with a standard Coolerguys standard pre-set thermal controller
All parts in our kits come with a 3 year replacement warranty at no cost to you
This particular *kit is for a three fan unit meant to cool your cabinet, multimedia center, aquarium, home grow op, brewing project or whatever else that may need cooling, the only limit is your imagination!
These fans move a combined 138 cubic feet (WxHxD) of air per minute (CFM) which is good for 2-6 components (up to 20 cubic feet of space with 2-4 shelves), this is just a general rule of thumb and it assumes you have adequate space for air to flow in from, and ventilation between shelving, we're currently working on an in depth guide to airflow and cooling however in the mean time if you have questions we're here to help you!
Can be mounted on any side of a cabinet, where room permits (cutout dimensions below). Insert completed cooler assembly in hole and attach with appropriate screws. Fan can be set to be either an intake or exhaust, simply mount the fan to the bracket pointing in the desired direction before installing (if you are looking at the label the air will flow towards you)
If you need additional information you can contact us!
Includes:
(3)Ultra Quiet & Reliable Coolerguys Dual Ball Bearing 120mm 3pin 12v Fan
With Dual Ball Bearings this Fan is rated to last 67,000+ hours running 365/24/7 (Nearly 6 years!)
The fan has a 30" (760mm) long cord, if you need to extend this length we have extensions here
(1) Coolerguys 1A 100-240V AC To 12V DC Power Supply
This is how the fan can run from a standard 2 prong wall socket, since it is 100-240V AC powered it can be used in any region if you use adapt to the appropriate plug.
All necessary screws, cables, and fasteners are included to assemble, install and operate this unit.
If you'd like to add additional brackets and fans to this kit you can find them here, non-thermal controlled kits only have enough ports for the fans which come with it, the standard thermal controlled and programmable controllers have 4 native ports, if you need more ports for fans we have adapters here.
Completed Fan and Bracket Dimensions when assembled using the included parts:
Acrylic & Metal: 17.75" x 6.5" x 1.38" (159 x 450 x 35mm)
Cutout size:
Acrylic & Metal: 16" x 5" (400 x 130mm)
General Instructions for CabCool Cabinet Cooler Kits (574 kb pdf)
Total Kit Contents:
(1) Coolerguys 1A 100-240V AC To 12V DC Power Supply
(3) Coolerguys Ultra Quiet 120x120x25mm Dual Ball Bearing Low Speed Fan
(1) Bracket of your choosing (Acrylic or Metal)
(1) Coolerguys Barrel to Triple 3pin
(3) Black 120mm Honeycomb Mesh Fan Grill
(3) Black 120mm Fan Grill
(24) Fan nuts and bolts
(6) #6 - 1/2" black Cabinet screw
This is a kit and some assembly is required.
PRODUCT SPECIFICATIONS:
Fan Speed: 1200 RPM
Operation Voltage: 6.5~13.8 Volts
Input current: 0.30 Amp Max
Operation temperature: -10 to +65 C
Storage temperature: -40 to +70 C
Airflow: 46 CFM
Noise Level: 20.4dBA
Lifespan is based on the operating temperature of 95F (35C)
We trust in our products at Coolerguys and test everything that is sent out! We happily extend a three-year replacement warranty to all our Coolerguys branded products.
