Scythe Ninja 4 CPU Cooler #SCNJ-4000
Review: NiKKTECH.com "Bottom line the Ninja 4 is perhaps the only model to bear the name Ninja since the original (and the copper editions) to actually leave us with the best possible impressions and for that it gets our Platinum Award."
With the Ninja 4 Scythe continues the Ninja series which is developed on uncompromising performance. The new T-M.A.P.S Technology, an optimized alignment of the heatpipes and a particularly effective heat transfer between heatsink and heatpipes, helped to reduce the weight compared to his predecessor. With these improvements and a special, to the Ninja 4 profile, adapted Glide Stream 120 PWM fan, the cooling performance could still be enhanced. The design of the laminated block permits the fan installation on all four sides, even on motherboards with AMD sockets. This enables the optimal integration of the Ninja 4 in the air flow of the pc-case and reduces turbulence and the emergence of hotspots.
Three-dimensional Multiple Airflow Pass-through Structure
By introducing our new T-M.A.P.S technology for the Ninja 4, we were able to increase the cooling capacity compared to previous models based on the older M.A.P.S lamellar structure. The clever arrangement of the cooling fins allows the usage of an additional pair of fins without suffering negative effects to weight or height of the heatsink and optimizes the cooling power in the lower speed range of the supplied fan.
Glide Stream 120 mm PWM Fan
The enclosed 120mm fan comes from the Glide- Stream PWM series. This new model offers the ability to adjust the maximum fan speed in 3 settings via a slide switch, allowing the user to choose between extremely silent operation or maximum cooling power.
Flexible Fan Mounting
Inspired by his predecessors, the Ninja 4 offers the option to install the fan on all four sides of the heatsink. This allows for very effective integration into air flow of the case. To further increase the performance, a second fan* can be installed by using the included additional pair of fan clips.
User-friendly Installation System
The proven HPMS (Hyper Precision Mounting System) mounting system is also to be found in Ninja 4 again . The mounting of the cooler is much easier. It requires fewer installation steps and time without compromising reliability.
*Extra fan must be purchased separately
Compatibility:
Intel®:
Socket LGA775
Socket LGA1150
Socket LGA1155
Socket LGA1156
Socket LGA1366
Socket LGA2011 / 2011-v3 (Square ILM)
AMD®:
Socket AM2
Socket AM2+
Socket AM3
Socket AM3+
Socket FM1
Socket FM2
Socket FM2+
Please note that for installation on motherboards with AMD® socket the original back plate of the motherboard will be necessary. Please confirm if it is on hand prior to your purchase.
Overall dimensions:130 x 153 x 155 (including fan - more dimensions) Weight:780 g / 900 g inklusive Lüfter
Heatpipenumbers / -diameter:6 / 6mm
Accessories:Installation material for Intel® and AMD® Socket, thermal grease, second pair of fan clips, installation manual.
Base plate material:nickel-plated copper
Fan - Specifications
Modelname:GlideStream 120 PWM
Model-Nr.:SY1225HB1212H-PS (3 operations modes H/M/L)
Fan dimensions:120 x 120 x 25 mm / 4.72 x 4.72 x 0.98 mm
Noise Level:
L: 4,0 ~ 12,5 dBA
M: 4,0 ~ 23,5 dBA
H: 4,0 ~ 29,5 dBA
Air Flow:
L: 21,97 ~ 73,90 m³/h | 12.93 ~ 43.50 CFM
M: 21,97 ~ 73,90 m³/h | 12.93 ~ 63.73 CFM
H: 21,97 ~ 73,90 m³/h | 12.93 ~ 84.64 CFM
Fan Speed:
L: 300 upm (±300) ~ 800 upm (±10%
M: 300 upm (±300) ~ 1150 upm (±10%)
H: 300 upm (±300) ~ 1500 upm (±10%)
Voltage / Amperage:DC 12V / 0,22A
Static Pressure:
L: 0,69 ~ 4,90 Pa / 0,07 ~ 0.50 mmH²O
M: 0,69 ~ 10,40 Pa / 0,07 ~ 1.06 mmH²O
H: 0,69 ~ 17,55 Pa / 0,07 ~ 1.79 mmH²O
Bearing Type: Sleeve Bearing
