Coolerguys Power Supply (2A) Converter 120V to 12V & Pre-set Thermal Controller
840556093695
This combo purchase is a great addition for our most of our Coolerguys Cabinet cooling kits. It includes Our 1A 4 pin molex 12V power supply and our pre-set thermal controller. The Power supply with quietly power our 12V fans and the thermal sensor will turn the connected fans on at ~88°F (31°C) and leave them running until the temperature drops below ~81°F (27°C).
Power Adapter:
Great Adapter to Power your Entertainment Cooling Center
Standard 4 Pin Molex Connector
Expandable - Can power up to 5 + Fans - (up to 1A)
Take advantage of Quiet 12V Computer Fans
UL Listed
4pin Molex Adapter with 60" Power Lead
Input: 100-240VAC 50/60Hz 1.5A
Output: 12V +- 1A
Thermal Controller:
(1) 4pin female mMolexport, 12v, ground, ground, 5v to power the device
(4) 3pin male connectors, 12v & ground out only, 3rd pin inactive
(1) 3mm Green LED, only lights when you are using in continuous mode with the switch in the position
(1) 3mm Dual Red/Green LED, when switch is in down thermal control position this will be red when below 81F and Green when the controller has activated the 3pin devices
*Controller draws 100ma
*Maximum power draw to not exceed 1800ma (1.8A) or it can damage the device
NOTE:Picture may vary slightly due to style type
Check manufacturer specs for power requirements
Specially Manufactured for Coolerguys.com
***please read*** Additional information for fan selection and temp monitors
Available Accessories :
Probe Extensions
Mounting Bracket
4pin to a 3pin power adapter, useful to power 4pin Molex devices from this controller
3pin extension cables (most fans/devices have 12" in length, needed if you are from the controller)
This is a demo of the Thermal controller powered by the above Adapter.
We trust in our products at Coolerguys and test everything that is sent out! We happily extend a three-year replacement warranty to all our Coolerguys branded products.
